Lear corporation Maroc
(Lear Corporation Automotive Electronics Maroc ) Technopolis-Rabat shore , parcelle 34-37, rocade Rabat-Salé 11100 Sala Al Jadida – Maroc
Effectif : entre 1000 et 5000
– Chiffre d’affaire : de 100,000,000 à 500,000,000 Dh
– S.a. – Capital 22 470 000 DH
– RC 14519 Salé
– Création 2011
Lear Corporation est une société américaine spécialisée dans la fabrication de faisceaux de câbles et composants pour automobile. et la distribution d’équipements intérieurs automobiles. Elle opère dans différents secteurs d’activités.
En général, le secteur des systèmes électroniques et électriques et électrotechnique, le secteur des sièges automobiles, habillages des portes, garniture de pavillon, tapis et acoustique, tableau de bord et composants .pièces détachées , Automobiles: pièces et équipements. et Carte Electronique .
Implantation de Lear Corporation
LEAR est riche d’une implantation mondiale, elle mobilise au total environ 114.000 salariés avec un chiffre d’affaire d’environ 17,9 milliards USD, une vente annuelle de $12.4 billion Classé deuxième au nord d’Amérique et la troisième en Europe et leader en Chine et en Inde.
Ainsi cet organisme se considère le premier dans le marché Soyfoam et leader de coupe de fouet de protection. Lear Corporation compte aujourd’hui 242 unités de production réparties dans 36 pays . 1.1. Client Lear Corporation, à travers ses différentes unités, sert tous les grands fabricants d’automobile dans le monde, dont nous citons: PSA PEUGEOT ,Ford, Renault, BMW, Nissan, Porche
ADVERTISEMENT
Groupe LEAR AUTOMOTIVE MOROCCO
Présentation Lear corporation
ADVERTISEMENT
LEAR AUTOMOTIVE Maroc (TRIM-FOAM) est une société anonyme simplifiée SAS, d’origine American, elle mobilise au total environ 1500 salariés, sa principale activité et la confection et l’injection des coiffes pour automobile.
Campagne de Recrutement Lear Corporation Maroc (16 Postes)
 |
| Emploi Lear Maroc |
Plant Controller
MISSIONS PRINCIPALES :
-Met en place l’organisation comptable et administrative selon les procédures de Lear Corporation.
-Met en place et applique le manuel comptable et de contrôle interne de Lear Corporation.
-Adapte de plan comptable à l’US GAAP.
-Participe à l’établissement des budgets annuels.
-Assure le suivi et le contrôle budgétaire.
-Supervise les achats et les coordonne avec la centrale d’achats Europe.
-Gère l’exécution de la paie.
-Suit les investissements et amortissements de l’entreprise selon les procédures en vigueur.
-Fait l’analyse et le suivi des contrôles des différentes composantes du cout de production, niveau de stock, fréquence de transport sur une base journalière, hebdomadaire et mensuelle.
-Coordonne de prévisionnel mensuel.
-Réalise le suivi des résultats par projet.
-Met en œuvre la comptabilité analytique et le contrôle de gestion.
-Consolide le compte d’exploitation analytique.
-Consolide le compte d’exploitation général.
Profil recherché:
Master en Finance
Anglais & Français Courants
5 ans d’experience minimum dans une fonction similaire
Experience en gestion d’équipe
QAD/ SAP, HFM, SOX Knowledge
Postulez ici
Financial Analyst
The financial analyst will support the financial team to achieve common economic objectives of the plant, performing different controls and analysis (Overhead, Capex, Inventory), within deadlines in compliance with Sox and internal procedures.
Your missions:
- Elaborate the annual budget and monthly forecast. Additionally, make the corresponding walks to analyze the variances regarding the previous statements.
- Build up the Gross profit report of the parts that are sold, in a weekly basic, and analyze the variances.
- Improves financial status by analyzing results, monitoring variances, identifying trends and recommending actions to management.
- Prepare and evaluate the profitability of the project approbation request, and ensure them approbation in the adequate level.
- Insure daily operational report and improve data quality.
- Insure Sales & GOGS monthly reconciliation.
- Insure the monthly follow-up of overheads.
- Takes the responsibility for keeping selves, co-workers, and equipment free of hazards.
- Participates on saving energy and proposes suggestions to control it.
To be successful for this role:
- Minimum 2 years of proven experience in a similar position
- Spirit of analysis
- Good financial knowledge
- Ability to prioritize work
Postulez ici
Ingénieur Produit
Vos missions:
- Analyser les plans techniques et assurer les faisabilités techniques
- Gérer les modifications au niveau produit de la demande Client jusqu’à l’éxpedition du produit.
- Créer les ECN sur SRM et suivi des open PO
- Assurer et fournir la formation nécessaire aux opérationnels suite aux modifications au niveau produit.
- Etablir les données de cotations pour les nouveaux produits et des modifications.
- Créer et vérifier les BOM. Et assurer l’audit BOM
- Gérer et suivre les documents techniques des différents produits.
- Participer au processus de réduction de coût de l’amélioration de la production.
- Résoudre et participer à la résolution des problèmes techniques liés à la production Et aux méthodes de travail, nouveaux processus, nouveaux modèles…
- Etre un support technique aux différents départements: production, logistique, qualité, achat…
Pré requis:
- Ingénieur industriel (de préférence en Textile)
- Justifier de 2 ans minimum d’expérience dans un poste similaire, (de préférence dans l’industrie textile).
Postulez ici
Ingénieur Qualité
Les missions :
- Assurer les respects des délais de fermeture des QN et la qualité des 8D
- Gestion de la qualité interne, animation des résultats qualité
- Création et mise à jour du système documentaire interne
- Participation dans les équipes de travail (QRQC, KAIZEN, GEMBA WALK..)
- Maitrise du niveau qualité interne, suivi rigoureux du taux de scrap
- Assurance des formations nécessaires aux membres de l’équipe qualité
- Préparation des audits externes (notamment ISO TS, audits clients …)
- Mettre à jour la documentation qualité
- Etre l’interlocuteur client.
- Traiter les retours clients.
Competence & experience:
- Bac + 5 Technique ou scientifique
- Justifier le minimum 2-3 ans d’expérience dans un poste similaire de préférence dans l’industrie automobile.
- Bonne communication, Autonomie et Proactivité
- Bon esprit d’analyse et travail d’équipe
Langues: Francais & Anglais
Postulez ici
Process & Tooling Engineer
Les missions :
-Assurer la définition du Process (équipement, Lay out, besoin en effectif.)
-Analyser les plans techniques et assurer les faisabilités techniques
-Préparer les études de faisabilité pour tous les changements de Process et les appliquer correctement.
-Assurer les AMDEC, ainsi que le suivi de révision selon le système de cotation
-Assurer et fournir la formation nécessaire aux opérationnels suite auxModifications au niveau Process.
-Gérer et suivre les documents techniques des différents produits.
-Participer au processus de réduction de coût de l’amélioration de la production.
-Résoudre et participer à la résolution des problèmes techniques liées à la productionet aux méthodes de travail, nouveaux processus, nouveaux modèles…
-Etre un support technique aux différents départements : production, logistique,
Qualité, achat
Competence & experience:
- De formation en Ingénierie industrielle ou Master spécialisé, vous justifiez d’une expérience d’au moins 1 an en apprentissage /stage de fin d’études ou dans un premier poste équivalent dans le secteur de l’automobile.
- Personne de terrain, autonome et faisant preuve de réelles capacités d’adaptation, vous savez analyser, synthétiser et mémoriser des informations techniques.
- Rigueur et bon relationnel sont des atouts indispensables pour votre réussite au sein de ce poste.
Postulez ici
Manufacturing Coordinator
Your missions:
- Coordinate Final Assembly area according to Lear and customers specifications respecting EH&S policy and 5S.
- Supervise and Manage people in assembly lines achieving safety, quality and productivity forecasted.
- Track and Report key operational metrics and improve continuously using CI tools (kaizen, 5S, lean, …), LPA and standard action plans to achieve plant objectives and succeed audits.
- You are motivated to take up an industrial and human challenge where you will be able to demonstrate versatility and initiatives
To be successful for this role:
- Level degree: High school level
- Professional Experience: 5 years in wiring and production team management
- Communication: Good level
- Seniority at Lear: 5 years
Postulez ici
Customer analyst management
As Direct report to MP&L Manager, head of customer service and Production control in the plant, while managing high qualified teams to deliver the business Targets in terms of quality, Delivery and cost.
Your missions:
The mission of Customer analyst management is overseeing all planning activities and staff members in the Planning division.
Ensure the customer satisfaction while optimizing Lear resources at the lowest overall cost.
To be successful for this role:
- Team work,
- Integrity
- Customer focus,
- Analytical skills
Language Skills:
- French.
- English.
Postulez ici
Maintenance Responsible
Ensure the optimal functioning of Lear equipment and infrastructures while taking care of our employee’s safety and environment.
Your missions:
- Plan and coordinate all maintenance activities in Lear plant including analyzing equipment needs, reliability issues, developing preventive/predictive maintenance programs
- Carry out inspections of the facilities and equipment to identify and resolve issues
- Check electrical and pneumatic installations of buildings to ensure functionality
- Plan and oversee all repair and installation activities
- Coach, mentor, train and develop maintenance and OLT employees to meet current and future business requirements
- Monitor spare parts inventory and place orders when necessary
- Manage the maintenance expenses by ensuring best practices in the industry
- Keep maintenance KPI’s report on daily activities
- Ensure compliance with health and safety and quality policies
To be successful for this role:
- Previous working experience as a Maintenance responsible for 3 years
- Hands on experience in planning maintenance operations
- Solid understanding of technical aspects of wiring equipment
- Applicable knowledge of facilities machines and equipment
- Excellent communication, interpersonal and leadership skills
- Outstanding organizational and time management skills
Postulez ici
Engineer Car Leader Process
Your missions:
- Car leader is the point of contact and Lear wiring plant representative for the Lead Unit Engineering Project Leader and Program Manager.
- Coordinator of all plant departments and related functions during a program launch or engineering change implementation.
- Program management at Lear wiring plant level.
- Generate the proper technical documentation at plant level and also to LU: Work instructions,…
- Ensure the proper usage of resources and plant installations for a flawless execution in terms of quality, cost and delivery of the program launch or engineering change maintenance.
- Responsible to ensure that communication is effective for technical issues with the Lead Unit, and for commercial and program management issues with program manager.
- Calculation of the needed investments to get the necessary tooling and equipments.
- Get customer and corporate approval of calculated investments (PO from customer and PAR from Lear).
- Responsible of ordering, reception and installation of tooling and equipments already defined.
- Followup of production and quality performances (efficiency, IPPM), till predefined objectives are achieved.
- Pilot of the weekly meeting of the project (QTS: Quote tracking system).
- Preparation of APQP/PPAP audits and evaluations held by the Customer.
- Conduct the Run@Rate and the Capacity verification according the program milestones.
- Control and followup of PPAP status of all products in charge.
- Support customer claims analysis and followup of the related action plans.
- Support of CI activities by calculation and implementation of new ideas.
- Comply with the internal system inside engineering department and support all internal and external audits: IATF,…
- Comply with HSE policy and objectives.
Postulez ici
Product Carline Leader
Coordinate product activities and ensure the communication with LU and program manager.
Prepare the production drawings and all the related data (Drawings, BOMs, UCS, APD times,…). Contribute in the plant objectives achievement in term of security, quality, Delivery and CI.
Prepare the production drawings and all the related data (Drawings, BOMs, UCS, APD times,…). Contribute in the plant objectives achievement in term of security, quality, Delivery and CI.
Your missions:
-Car leader is the point of contact and Lear wiring plant representative for the Lead Unit Engineering Project Leader and Program Manager.
-Coordinator of all plant departments and related functions during a program launch or engineering change implementation.
-Program management at Lear wiring plant level.
-Responsible to ensure that communication is effective for technical issues with the Lead Unit, and for commercial and program management issues with program manager.
- Own all operation Product design portion of a particular wiring family or families:
-Responsible for accuracy of data, and drawings preparation.
-Responsible for BOMs, UCS, APD … and related data preparation.
-Responsible for engineering change control.
-Ensure PCN’s/ECR’s quotation within the project timing.
- Address design or manufacturing problems using engineering tools:
-DFMs, …
-Participate in design reviews.
- Work closely with Manufacturing Engineering to ensure designs are feasible.
- Meet customer MRD date during program life (prototype phases, launch..).
- Contribute in plant performance objectives realization.
-Calculation of the needed investments to get the necessary tooling and equipments.
-Get customer and corporate approval of calculated investments (PO from customer and PAR from Lear).
-Pilot of the weekly meeting of the project (QTS: Quote tracking system).
-Preparation of APQP/PPAP audits and evaluations held by the Customer.
-Control and followup of PPAP status of all products in charge.
-Support customer claims analysis and followup of the related action plans.
-Support of CI activities by calculation and implementation of new ideas.
-Comply with the internal system inside engineering department and support all internal and external audits: IATF,…
-Comply with HSE policy and objectives.
Postulez ici
Product Engineer
Prepare the production drawings and all the related data (Drawings, BOMs, UCS, APD times,…). Contribute in the plant objectives achievement in term of security, quality, Delivery and CI.
Your missions:
- Interface with Design engineering and Program management teams:
–Support quotation and X-functional program meetings.
–Support build issues meetings.
- Own all operation Product design portion of a particular wiring family or families:
–Responsible for accuracy of data, and drawings preparation.
–Responsible for BOMs, UCS, APD … and related data preparation.
–Responsible for engineering change control.
–Ensure PCN’s/ECR’s quotation within the project timing.
- Address design or manufacturing problems using engineering tools:
–DFMs, …
–Participate in design reviews.
- Work closely with Manufacturing Engineering to ensure designs are feasible.
- Support Program Management, Sales, and Quality team in case of need.
- Meet customer MRD date during program life (prototype phases, launch..).
- Contribute in plant performance objectives realization.
To be successful for this role:
- High engineering school degree,
- Auctocad is a must,
- Excel, Word and Powerpoint,
- First experience in Automotive is a plus.
Postulez ici
Production Planner
Missions :
-Schedules production taking in consideration all the existing constraints and customer’s needs as priority.
-Coordinate production workflow for one or multiple projects.
-Plan and prioritize operations to ensure maximum performance and minimum delay in production and shipping.
-Monitor the production realizations vs schedules by work center.
-Follow customer orders communication and variation and report all related issues.
-Address issues when they arise aiming for minimum disruption.
-Prepare and submit status and performance reports.
-Respect the Targets such as inventory levels, service rate.
-Support in the new Launches and ensure a smooth Production EOL for the assigned projects.
-Collaborate with all parties to ensure coverage of customer.
Competence & experience:
-Excellent knowledge of production planning and quality control principles.
-Working knowledge of MRP MS Office and ERP systems.
-Skilled in maths and statistics.
-Strong organizational and problem-solving skills.
-Excellent communication abilities.
-High school diploma; Further education or certification is preferred.
Postulez ici
Quality Manufacturing Assurance
The primary focus of the Manufacturing Quality Engineer is executing product and process controls per the control plan in conjunction with the plant’s production team. Lead 8D problem resolution process for internal and external raised concerns.
Your missions:
-Management of quality team controllers and technicians.
-Ensure the execution of the control plan / quality
-Utilizing problem solving skills to find root causes for internal & external issues
-Establish direct contact with quality residents at customer sites to find solutions to quality problems reported by the customer
-Monitor 8D meetings & the follow up of the implementation of corrective and preventive actions and verify their effectiveness
-Follow the quality indicators IPPM, RPPM, DPPM, and WC.
-Developing and maintaining quality standards
To be successful for this role:
-Bac+3 minimum with experience within an automotive wiring Industry (Minimum 5 Years experience is a must)
-Knowledge of Quality Management systems IATF 16949 (standards),
-Demonstrated expertise in problem solving tools: ISHIKAWA, 8D, 5WHY, PARETO…..
Ability to work in a high-tempo environment and interact with team members over a wide scope of the organization.
Postulez ici
Tools & Equipment Engineer
Your missions:
- Ensure the needed equipment and tools in the defined timing for the project
- Follow up of tools and equipment validations
- Coordinate with all teams and suppliers to success new projects launches
- RFQ’s preparation and local supplier’s management
To be successful for this role:
- Minimum Bac+3 (Industrial Engineering).
- At least 2 years’ experience in Engineering Department.
- Experience in RFQ’s preparation and local supplier’s management.
- Leadership & team work spirit.
- English and French mandatory.
- Ability to work with cross functional teams.
- High knowledge of problem solving tools.
Postulez ici
Methods Engineer
Your missions:
-Represent the industrial organization of the project in internal or external (customers, suppliers) meetings
-Ensure adequate interaction with the product development team to perform simultaneous engineering
-Identify technical problems and make the necessary technical decisions within the limitations imposed by contractual requirements.
-Draw up definitions and detailed specifications of tasks and sub-tasks or supervise their drafting by other resources if requested.
-Define the materials or services to be purchased for engineering tasks within the allocated resource budget, in conjunction with the Project Engineer.
-Approve all the technical design necessary for the purchase and/or construction of products to be supplied to the Client.
-Participate to meetings to examine and, if necessary, audit the technical design, and take part in technical examinations with the Client. Cost and scheduling decisions which influence contractual obligations or other functions must be approved by the Project Engineer (if any) and communicated to the Engineering Manager and Project Manager.
-Notify the Project Engineer (if any) and Engineering Manager of any problems occurring with any other engineering areas.
-Perform all the necessary engineering verifications and calculations necessary for the methodology to be implemented.
-Supervise and verify the drafting describing the methodology to be implemented.
-Summarize and clarify in a manual all methodology activities, clearly identifying the show stoppers (if any). Transfer inside the manual all useful data derived by analyses performed by others.
To be successful for this role:
- Bachelor’s degree in Mechanical or Industrial Engineering – preferred
- proficiency using Microsoft Office Suite (Outlook, Word, Excel, PowerPoint)
- Knowledge of Project Management principles
- Ability to read and interpret Engineering drawings and specifications
- self-starter, Ability to work both in a team and independently
Postulez ici
Quality Engineer
Your missions:
-Learns and uses quality tools consistent with quality processes to enable the focus on prevention by identifying and performing activities to minimize risk. Investigates product and process quality related issues and recommends changes to control plans and/or prints.
-Gathers and analyzes data pertinent to quality tools in the Enterprise Order Fulfillment Process (EOFP), Enterprise Product Delivery Process (EPDP) and/or Customer Support Process (CSP).
-Performs quality audits, including supporting International Standards Organization (ISO) audits, and maintains quality manual.
-Inputs and maintains information in factory databases and systems.
-Monitors quality plan tracking system.
-Assists in reviews and investigations of warranty claim information.
To be successful for this role:
-Knowledge of drawing and schematic interpretation, product models, geometric dimensioning and tolerancing. -Has a good understanding of the principles and can independently use the knowledge.
-Knowledge of standard quality tools such as FMEA (Failure Modes Effect Analysis), SPC (Statistical Process Control), Root Cause Analysis, Statistics. – Has a general understanding of the principles and uses the knowledge with assistance.
-Knowledge of standard quality tools such as FMEA (Failure Modes Effect Analysis), SPC (Statistical Process Control), Root Cause Analysis, Statistics. (Has a general understanding of the principles and uses the knowledge with assistance.)
-SPC Knowledge
